Bulk Molding Compound

BMC (Bulk Molding Compound)/Thermoset Molding require the use of special material feed systems known as “stuffers”. The stuffer is used to prepare the material for presentation to the screw. The stuffer stores the material in a styrene saturated atmosphere, limiting the drying of the material.

Thermoset Machine FeaturesBMC dedicated control and softwareClose loop pressure controlStuffer interfaceScrew anti-repeat4 zones mold heats standard1 stage air ejectThermoset barrel and screwVenting/breathing sequenceBronze bushingsChrome rodsHeat/cool unitsSled control
    Click to enlarge

For prices and info contact:

CUSTOM PLASTIC INJECTION MOLDING SERVICE

The Forti Plastics is a custom plastic injection molding service company, who is available to operate in both 4″ and 6″ systems. Bodies are available in transparent, opaque or ½ transparent and ½ opaque materials. The transparent body has a warranty against defects in workmanship and materials. The high strength opaque body includes an 18-month warranty against breakage, defects in workmanship, and material defects. Our trademark RedLatch® has a limited lifetime warranty on materials and workmanship against defects and breakage.

PEVCO’s Leak-Resistant carriers are designed to provide the most inside capacity possible. There is a replaceable seal around the outsite to contain leaks within the carrier preventing them from spilling into the entire pneumatic system. The wearbands are a two-piece velcro system making them very easy to change. The patented latch is made of metal to prevent breakage within the system. There is a secondary catch to ensure the carrier will remain closed once it is closed prorperly.

We feel this is the best alternative to a leak-resistant carrier available in the market. Give it a try and see what you think.

Custom plastic molding -Security Carriers

These locking carriers provide the security needed to transport important and confidential material with safety. Only the individual with the appropriate key has access to its contents. Each lock allows keys to be removed only when they are in the locked position. This prevents the carrier from being sent unlocked and the contents being intercepted. The lock for each individual carrier is unique.

If you have confidential, hazardous, or valuable material to transport, this is the carrier for you.

Available for 4″ and 6″ systems.

4 X 7 POINT-TO-POINT PNEUMATIC CARRIER

The model 47-12 is for use in 4″ x 7″ point-to-point pneumatic systems. The unique side-opening carrier is easily loaded with large or bulky items. It is available in ½ clear and ½ black or all black. The black impact-resistive body is an ideal replacement for aluminum or other heavy-load carriers. It is closed with a spring-loaded plastic catch, but is also available with a key lock. It has gray felt bumpers and can be color-coded with color strips.

The approximate dimensions at the largest points on the carrier are 3 ¾” (H) x 6 ¾” (W) x 14 ¼” (L).

SIDE OPENING PNEUMATIC TUBE CARRIERS FOR DRIVE-UP

The Model 41 is designed to be the industry leader in side-opening carriers. It can be assembled into many different models to fit all systems requiring a side-opening canister. The most commonly used of these models are the 41-5PT in Hamilton systems and 41P in Diebold VAT II systems.

The Model 40 has a sleek new body style with flared ends to fit Tel Air systems. It may be color-coded either with the 1/2 body, the molded bumper or both. Bodies come in colors of red, blue, green, yellow, white, black, and clear. Bumpers come in the same color as bodies, also Gray.

The 40BW would be color-coded with Velcro. The Velcro comes in colors of red, blue, yellow, green, white, brown, and black.

There is no additional charge for color when ordering a carrier.

The Model PB410 is designed to operate in conveyor belt systems. It is sturdily constructed in one piece with a living hinge making it easy to open and assuring long life. The carrier is produced in Translucent colors of Red, Blue Green, and Yellow making it possible to see what is on the inside or solid colors of Black, Gray and Putty are also available.

Colored vinyl Self-adhesive strips are also available for use with the solid colored carriers. The strips are colored in red, blue, green, yellow, brown, and white. 

The approximate dimensions for PB410 are:
1 1/3,H ‘ x 4½ W” x 10¼ L”.

Plastic Injection Tooling

Here are some recent Fortis Plastics Group prototyping, plastic injection tooling & production applications. For additional information or assistance, please contact

On-line inspection instrumentation for the computer industry.  Inspection gage with remote SPC capabilities for the inspection of computer drive systems.

Prototype housing for an electronic geophysical surveying device. Made without tooling by joining together multiple sections made by stereolithography.

Ten plastic molds in ten weeks. Precision manufacturing and time to market were critical issues for CR Bard. And Brookfield Group came through. A remarkable development schedule. production and fine-tuning often plastic injection tooling mold in ten weeks.

Progressive die for the manufacture of the industrial razor blade holder. Die produced components complete, eliminating the need for secondary operations.

Parallel development of prototypes and building tools for the hand-held terminal. To save time and money, the first 10,000 pieces were manufactured by using modified aluminum molds initially used for prototypes.

Large inspection gages for the aircraft industry.Two stations final inspection gage utilizing ultra precision LVDT electronic probes feeding to  PC computer for SPC of commercial aircraft turbine vanes.

Early involvement adds value to the Allen Wrench Tool Caddy production. Early project management. even at the napkin sketch phase… helps identify the many steps where Brookfield Group can eliminate time lapses and/or operate concurrently to gain, rather than lose, time.

Plastic Part Development

Supporting Phillips Plastic Mold tooling design through distribution capabilities is the

Company’s rich history of research and development activities, which are aimed at helping customers push the boundaries with polymers, metals, and ceramics. With experience examining the new product and process opportunities to evaluating, designing, and building automation systems and components, Phillips’ research and development team can help reduce time to market, increase throughput, lower costs, and improve quality.

In addition, Phillips’ dedicated Technology Center allows for creative freedom and a place for customers to gain access to some of the most advanced products and processes in the marketplace, including:

  • New product development, automation services, and program management
  • Electrical, chemical, and mechanical engineering
  • Materials science and engineering
  • Coating and finishing engineering
  • Medical plastic molding devices
  • Ceramics
  • Electroluminescence/lighting
  • Testing and evaluation
  • FEA, market analysis